32vfs, cpiofs, tapfs, tarfs, tpfs, v6fs, v10fs, zipfs – mount archival
fs/32vfs [ –b blocksize ] [ –m mountpoint ] [ –p passwd ] [ –g group
These commands interpret data from traditional tape or file system
formats stored in file, and mount their contents (read–only) into
a Plan 9 file system. The optional –p and –g flags specify Unix–format
password (respectively group) files that give the mapping between
the numeric user– and group–ID numbers on the
media and the strings reported by Plan 9 status inquiries. The
–m flag introduces the name at which the new file system should
be attached; the default is /n/tapefs. |
32vfs interprets raw disk images of 32V systems, which are ca. 1978 research Unix systems for the VAX (512 byte block size, the default), and also pre–FFS Berkeley VAX systems (1KB block size).
Cpiofs interprets cpio tape images.
Tarfs interprets tar tape images.
Tpfs interprets tp tapes from the Fifth through Seventh Edition research Unix systems.
Tapfs interprets tap tapes from the pre–Fifth Edition era.
V6fs interprets disk images from the Fifth and Sixth edition research Unix systems (512B block size).
V10fs interprets disk images from the Tenth Edition research Unix systems (4KB block size).
Zipfs interprets zip archives (see gzip(1)).
These commands are constructed in a highly stereotyped way using
the files fs.c and util.c in /sys/src/cmd/tapefs, which in turn
derive substantially from ramfs(4).|