NAME
ndbopen, ndbcat, ndbchanged, ndbclose, ndbreopen, ndbsearch, ndbsnext, ndbgetvalue, ndbfree, ipattr, mkptrname, ndbgetipaddr, ndbipinfo, csipinfo, ndbhash, ndbparse, csgetvalue, ndbfindattr, dnsquery, ndbdiscard, ndbconcatenate, ndbreorder, ndbsubstitute, ndbdedup, ndbsetmalloctag, ndbvalfmt – network database

SYNOPSIS
#include <u.h>
#include <libc.h>
#include <bio.h>
#include <ndb.h>

Ndb*         ndbopen(char *file)

Ndb*         ndbcat(Ndb *db1, Ndb *db2)

int          ndbchanged(Ndb *db)

int          ndbreopen(Ndb *db)

void         ndbclose(Ndb *db)

Ndbtuple*    ndbsearch(Ndb *db, Ndbs *s, char *attr, char *val)

Ndbtuple*    ndbsnext(Ndbs *s, char *attr, char *val)

char*        ndbgetvalue(Ndb *db, Ndbs *s, char *attr, char *val,
char *rattr, Ndbtuple **tp)

char*        csgetvalue(char *netroot, char *attr, char *val,             char *rattr, Ndbtuple **tp)

char*        ipattr(char *name)

void         mkptrname(char *ip, char *rip, int rlen);

Ndbtuple*    ndbgetipaddr(Ndb *db, char *sys);

Ndbtuple*    ndbipinfo(Ndb *db, char *attr, char *val, char **attrs,
int nattr)

Ndbtuple*    csipinfo(char *netroot, char *attr, char *val,
char **attrs, int nattr)

ulong        ndbhash(char *val, int hlen)

Ndbtuple*    ndbparse(Ndb *db)

Ndbtuple*    dnsquery(char *netroot, char *domainname, char *type)

Ndbtuple*    ndbfindattr(Ndbtuple *entry, Ndbtuple *line, char *attr)

void         ndbfree(Ndbtuple *db)

Ndbtuple*    ndbdiscard(Ndbtuple    *t, Ndbtuple *a)

Ndbtuple*    ndbconcatenate(Ndbtuple *a, Ndbtuple *b)

Ndbtuple*    ndbreorder(Ndbtuple *t, Ndbtuple *a)

Ndbtuple*    ndbsubstitute(Ndbtuple *t, Ndbtuple *from, Ndbtuple *to)

Ndbtuple*    ndbdedup(Ndbtuple *t)

void         ndbsetmalloctag(Ndbtuple *t, uintptr tag)

int          ndbvalfmt(Fmt*)

DESCRIPTION
These routines are used by network administrative programs to search the network database. They operate on the database files described in ndb(6).

Ndbopen opens the database file and calls malloc(2) to allocate a buffer for it. If file is zero, all network database files are opened.

Ndbcat concatenates two open databases. Either argument may be nil.

Ndbreopen throws out any cached information for the database files associated with db and reopens the files.

Ndbclose closes any database files associated with db and frees all storage associated with them.

Ndbsearch and ndbsnext search a database for an entry containing the attribute/value pair, attr=val. Ndbsearch is used to find the first match and ndbsnext is used to find each successive match. On a successful search both return a linked list of Ndbtuple structures acquired by malloc(2) that represent the attribute/value pairs in the entry. On failure they return zero.
typedef struct Ndbtuple Ndbtuple;
struct Ndbtuple {
char        attr[Ndbalen];
char        *val;
Ndbtuple    *entry;
Ndbtuple    *line;
ulong       ptr;      /* for the application; starts 0 */
char        valbuf[Ndbvlen];    /* initial allocation for val */
};

The entry pointers chain together all pairs in the entry in a null–terminated list. The line pointers chain together all pairs on the same line in a circular list. Thus, a program can implement 2 levels of binding for pairs in an entry. In general, pairs on the same line are bound tighter than pairs on different lines.

The argument s of ndbsearch has type Ndbs and should be pointed to valid storage before calling ndbsearch, which will fill it with information used by ndbsnext to link successive searches. The structure Ndbs looks like:
typedef struct Ndbs Ndbs;
struct Ndbs {
Ndb        *db;     /* data base file being searched */
...
Ndbtuple *t;      /* last attribute value pair found */
};

The t field points to the pair within the entry matched by the ndbsearch or ndbsnext.

Ndbgetvalue searches the database for an entry containing not only an attribute/value pair, attr=val, but also a pair with the attribute rattr. If successful, it returns a malloced copy of the NUL–terminated value associated with rattr. If tp is non nil, *tp will point to the entry. Otherwise the entry will be freed.

Csgetvalue is like ndbgetvalue but queries the connection server instead of looking directly at the database. Its first argument specifies the network root to use. If the argument is 0, it defaults to "/net".

Ndbfree frees a list of tuples returned by one of the other routines.

Ipattr takes the name of an IP system and returns the attribute it corresponds to:
dom   domain name
ip    Internet number
sys   system name

Mkptrname converts the address string ip to a reverse lookup domain–name, returned in rip. The rlen argument gives the maximum size of the rip buffer including the NUL–terminator. If ip already is a reverse lookup domain–name or has invalid ip address syntax, then ip is copied into rip verbatim.

Ndbgetipaddr looks in db for entries matching sys as the value of a sys= or dom= attribute/value pair and returns all IP addresses. If sys is already an IP address, a tuple containing just that address is returned.

Ndbipinfo looks up Internet protocol information about a system. This is an IP aware search. It looks first for information in the system's database entry and then in the database entries for any IP subnets or networks containing the system. The system is identified by the attribute/value pair, attr=val. Ndbipinfo returns a list of tuples whose attributes match the attributes in the n element array attrs. If any attrs begin with @, the @ is excluded from the attribute name, but causes any corresponding value returned to be a resolved IP address(es), not a name. For example, consider the following database entries describing a network, a subnetwork, and a system.
ipnet=big ip=10.0.0.0
dns=dns.big.com
smtp=smtp.big.com
ipnet=dept ip=10.1.1.0 ipmask=255.255.255.0
smtp=smtp1.big.com
ip=10.1.1.4 dom=x.big.com
bootf=/386/9pc

Calling
ndbipinfo(db, "dom", "x.big.com", ["bootf" "smtp" "dns"], 3)

will return the tuples bootf=/386/9pc, smtp=smtp1.big.com, and dns=dns.big.com.

Csipinfo is to ndbipinfo as csgetvalue is to ndbgetvalue.

The next three routines are used by programs that create the hash tables and database files. Ndbhash computes a hash offset into a table of length hlen for the string val. Ndbparse reads and parses the next entry from the database file. Multiple calls to ndbparse parse sequential entries in the database file. A zero is returned at end of file.

Dnsquery submits a query about domainname to the ndb/dns mounted at netroot/dns. It returns a linked list of Ndbtuple's representing a single database entry. The tuples are logically arranged into lines using the line field in the structure. The possible type's of query are the attributes on each returned tuple line:
ip    find the IP addresses. Returns domain name (dom) and ip address (ip).
ipv6find the IPv6 addresses. Returns domain name (dom) and ipv6 address (ip).
mx    look up the mail exchangers. Returns preference (pref) and exchanger (mx).
ptr   do a reverse query. Here domainname must be an ASCII IP address. Returns reverse name (ptr) and domain name (dom).
cname
get the system that this name is a nickname for. Returns the nickname (dom) and the real name (cname).
soa   return the start of area record for this field. Returns area name (dom), primary name server (ns), serial number (serial), refresh time in seconds (refresh), retry time in seconds (retry), expiration time in seconds (expire), and minimum time to lie (ttl).
srv   get the service records. Returns the priority of target host (pri), relative weight (weight) for entries with the same priority, port on this target host of this service (port), and the domain name of the target host (target).
txt   get the descriptive text. The semantics of the text depends on the domain.
ns    name servers. Returns domain name (dom) and name server (ns).
caa   get the certificate authority records. Returns the (tag) and (flags).

Ndbfindattr searches entry for the tuple with attribute attr and returns a pointer to the tuple. If line points to a particular line in the entry, the search starts there and then wraps around to the beginning of the entry.

All of the routines provided to search the database provide an always consistent view of the relevant files. However, it may be advantageous for an application to read in the whole database using ndbopen and ndbparse and provide its own search routines. The ndbchanged routine can be used by the application to periodically check for changes. It returns zero if none of the files comprising the database have changes and non–zero if they have.

Finally, a number of routines are provided for manipulating tuples.

Ndbdiscard removes attr/val pair a from tuple t and frees it. If a isn't in t it is just freed.

Ndbconcatenate concatenates two tuples and returns the result. Either or both tuples may be nil.

Ndbreorder reorders a tuple t to make the line containing attr/val pair a first in the entry and making a first in its line.

Ndbsubstitute replaces a single attr/val pair from in t with the tuple to. All attr/val pairs in to end up on the same line. from is freed.

Ndbdedup removes duplicate attr/val pairs from tuple list t.

Ndbsetmalloctag sets the malloc tag (see setmalloctag in malloc(2)) of each tuple in the list t to tag.

Ndbvalfmt formats a char* string of a Ndbtuple val, adding " quoting if necessary. It is typically enabled by calling:
fmtinstall('$', ndbvalfmt);

And then used like:
Ndbtuple *t = ...
print("%s=%$", t–>attr, t–>val);

FILES
/lib/ndb    directory of network database files

SOURCE
/sys/src/libndb

SEE ALSO
ndb(6), ndb(8)